Current issue
Archive
About the Journal
About
Editorial Board
Abstract & Indexing
Contact
Editorial Policies
Authorship & COI
Ethical principles
Principles of Transparent Checklist
Open access
For Authors
Instructions to Authors
Detailing Guidelines for Authors
Review process
Review sheet
How to submit
Open Access license
ORIGINAL PAPER
Modelling of Work of the Rotor-Type Blade Pump with Revolving Stator
1
Lviv Polytechnic National University, Institute of Mechanical Engineering and Transport, 1 Profesorska St., Lviv, 79013, Ukraine
2
Lviv National Agrarian University, Faculty of Mechanic and Power Engineering, Lviv-Dubliany, 80381, Ukraine
Online publication date: 2021-12-07
Publication date: 2021-12-01
International Journal of Applied Mechanics and Engineering 2021;26(4):17-28
KEYWORDS
ABSTRACT
In the article, the analytical dependences of modelling the cell cross-sectional area between two adjacent blades of a rotary blade pump and capacity for a pump with fixed and rotating stators are given, and analytical dependences are derived to model the power necessary to overcome the friction forces of the blades. The forces acting on the radially placed blade of a rotary pump with a fixed stator (non-rotating or stationary) and a rotating stator are analyzed. Design and technological parameters that influence the pump capacity and power are taken into account. The power required for the movement of the pump blade without taking into account the compression of the air has the opposite character of the change as to the pump capacity The capacity of a rotary pump with a rotating stator is three times higher than that of a stationary stator. The rotary pump with a rotating stator, with six radially spaced blades, consumes 0.854 [kW] less power to overcome the blade friction of 1 313 [kW]. The results of modelling of the pump work are given.
REFERENCES (22)
1.
World Compressor Market (2017): Japanese Air Conditioning Heating and Refrigeration News.– March 25, pp.61-112.
2.
Monasry J.F., Aoki T., Shida S., Hatayama M., Hirayama T. and Okada M. (2018): Development of large capacity and high efficiency rotary compressor.– 24th International Compressor Engineering Conference at Purdue, July 9-12, paper 2576. [online]. Available at. https://docs.lib.purdue.edu/ic....
3.
Lim Yeu De, Poh Wai Chang and Ooi Kim Tiow. (2018): Leakage simulation of a lubricant-free rotary type swing compressor rotor endface clearance.– International Compressor Engineering Conference, paper 2612. [online]. Available at. https://docs.lib.purdue.edu/ic....
4.
Soedel W. (2006): Sound and Vibrations of Positive Displacement Compressors.– CRC press, p.343.
5.
Tramschek A. B. and Ooi, K. (1992): Effects of port geometry, dimensions and position on the performance of a rotary compressor.– Paper presented at the International Compressor Engineering Conference, paper 912. [online]. Available at. http://docs.lib.purdue.edu/ice....
6.
Ma G.Y. and Li H.Q. (2001): Vane Compressor. Rotary Compressor (in Chinese).– BeiJing: China Machine Press, pp.92-183.
7.
Dmytriv V.T., Dmytriv I.V., Borovets V.M., Horodetskyy I.M., Kachmar R.Y. and Dmyterko P.R. (2019): Analytical-experimental studies of delivery rate and volumetric efficiency of rotor-type vacuum pumps for milking machine.– INMATEH - Agricultural Engineering, vol.58, No.2, pp.57-62. DOI: 10.35633/INMATEH-58-06.
8.
Dmytriv V., Dmytriv I., Horodetskyy I. and Dmytriv T. (2019): Analytical dynamic model of coefficient of friction of air pipeline under pressure. – Diagnostyka, vol.20, No.4, pp.89-94. DOI: 10.29354/diag/114334.
9.
Mindaugas R. (2017): Vane friction and wear influence on rotary vane compressor efficiency and operation: research and analysis review.– Agricultural Engineering, Research Papers, Vol.49, pp.1-12.
10.
Wu J., Zhang L., Huang L. and Tang Y. (2004): Numerical simulation and performance analysis of rotary vane compressors for automotive air conditioner.– International Compressor Engineering Conference at Purdue, paper 124. [online]. Available at. https://docs.lib.purdue.edu/ic....
11.
Kong X.Z., Yang H.L. and Sun T.S. (2005): Study on the calculating model of power of vane compressor.– Fluid Machinery, vol.33, No.1, pp.25-27.
12.
Sarip A.R. and Musa M.N. (2012): Theoretical study of a novel multi vane rotary compressor.– International Compressor Engineering Conference at Purdue, paper 1307. [online]. Available at. https://docs.lib.purdue.edu/ic....
13.
Kawamura R., Sekiya S., Sasaki T., Maeyama H., Takahashi S. and Sugiura K. (2016): A study on high efficiency wing-vane compressor, part 1: a simulation analysis of dynamic model.– 23 International Compressor Engineering Conference at Purdue, July 11-14, paper 1104. [online]. Available at. https://docs.lib.purdue.edu/ic....
14.
Hu Y., Xu J., Wan P., Luo F., Wu F. and Ren L. (2018): A Study on novel high efficiency vane compressor.– 24 International Compressor Engineering Conference, July 9-12, paper 2601. [online]. Available at. https://docs.lib.purdue.edu/ic....
15.
Costanzo I., Valenti G., Murgia S. and Baia F. (2018): Experimental investigation on a novel two-stage sliding-vane air compressor based on the intracooling concept.– 24 International Compressor Engineering Conference, July 9-12, paper 2597. [online]. Available at. https://docs.lib.purdue.edu/ic....
16.
Walicka A.and Jurczak P. (2017): Influence of total inertia effects in a thrust curvilinear bearing lubricated with newtonian lubricants.– Int. J. of Applied Mechanics and Engineering, vol.22, No.4, pp.1045-1058. DOI: 10.1515/ijame-2017-0067.
17.
Walicka A., Walicki E. and Jurczak P. (2019): Inertia effects in a multilobe conical bearing lubricated with a couple stress fluid.– Int. J. of Applied Mechanics and Engineering, vol.24, No.2, pp.439-451. DOI: 10.2478/ijame-2019-0027.
18.
Walicka A., Jurczak P. and Falicki J. (2017): Curvilinear squeeze film bearing lubricated with a DeHaven fluid or with similar fluids.– Int. J. of Applied Mechanics and Engineering, vol.22, No.3, pp.697-715. DOI: 10.1515/ijame-2017-0044.
19.
Mohammed A., Nabil M., Ahmed El-Baz and Ashraf H. (2018): Flow modelling and performance assessment of rotary sliding vane pump using computational fluid dynamics.– Journal of Al Azhar University Engineering Sector, vol.13, No.49, pp.1268-1288. DOI: 10.21608/AUEJ.2018.18942.
20.
Cheng Y., Wang X., Chai H., Sun T., Shahzad H. and Rehman W. (2021): The theoretical performance analysis and numerical simulation of the cylindrical vane pump.– Arabian Journal for Science and Engineering, vol.46, pp.2947-2961. DOI.org/10.1007/s13369-020-05294-9.
21.
Kolasinski P., Błasiak P. and Rak J. (2016): Experimental and numerical analyses on the rotary vane expander operating conditions in a micro organic rankine cycle system.– Energies, vol.9, No.8, p.606, DOI.org/10.3390/en9080606.
22.
Petrović R. (2009): Mathematical modeling and experimental verification of operating parameters of vane pump with double effect.– Strojniški vestnik - Journal of Mechanical Engineering, vol.55, No.1, pp.26-32.
Share
RELATED ARTICLE
| eISSN: | 2353-9003 |
| ISSN: | 1734-4492 |
Task: edition of a scientific journal, its internationalization and ensuring open access to the journal via the Internet
© 2006-2024 Journal hosting platform by Bentus
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
