Current issue
Archive
About the Journal
About
Editorial Board
Abstract & Indexing
Contact
Editorial Policies
Authorship & COI
Ethical principles
Principles of Transparent Checklist
Open access
For Authors
Instructions to Authors
Detailing Guidelines for Authors
Review process
Review sheet
How to submit
Open Access license
ORIGINAL PAPER
On the Uniqueness Conditions and Bifurcation Criteria in Coupled Thermo-Elasto-Plasticity
1
Opole University of Technology, Faculty of Applications of Chemistry and Mechanics, 45-036 Opole, Luboszycka 7, Poland
Online publication date: 2017-03-04
Publication date: 2017-02-01
International Journal of Applied Mechanics and Engineering 2017;22(1):199-227
KEYWORDS
bifurcation of the equilibrium stateconditions and criteria of uniquenessboundary-value problemgeneralized coupled thermo-elasto-plasticitycomparison bodiesfamily of local conditions of uniquenessparameter of the optimization
ABSTRACT
The global and local conditions of uniqueness and the criteria excluding a possibility of bifurcation of the equilibrium state for small strains are derived. The conditions and criteria are derived analyzing the problem of uniqueness of solution of the basic incremental boundary problem of coupled generalized thermo-elasto-plasticity. This paper is a continuation of some previous works by the author, but contains new derivation of the global and local criteria excluding a possibility of bifurcation of the equilibrium state for a comparison body dependent on statically admissible fields of stress velocity. All the thermal elastoplastic coupling effects, non-associated laws of plastic flow and influence of plastic strains on thermoplastic properties of a body were taken into account in this work. Thus, the mathematical problem considered here is not a self-conjugated problem. The paper contains four Appendices A, B, C and D where the local necessery and sufficient conditions of uniqueness have been derived.
REFERENCES (41)
1.
Śloderbach Z. (1980): Bifurcations criteria for equilibrium states in generalized thermoplasticity [in Polish], Ph.D. thesis. – IFTR Reports, Institute of Fundamental Technological Research, Polish Academy of Sciences, nr 37/1980, Warsaw, pp.1-100.
2.
Śloderbach Z. (1983): Generalized coupled thermoplasticity. Part I. Fundamental equations and identities. – Archives of Mechanics, No.35, vol.3, pp.337-349.
3.
Śloderbach Z. (1983): Generalized coupled thermoplasticity. Part II. On the uniqueness and bifurcations criteria. – Archives of Mechanics, No.35, vol.3, pp.351-367.
4.
Mróz Z. and Raniecki B. (1976): A derivation of the uniqueness conditions in coupled thermoplasticity. – Int. J. Eng. Sci., No.14, pp.395-401.
5.
Mróz Z. and Raniecki B. (1976): On the uniqueness problem in coupled thermoplasticity. – Int. J. Eng. Sci., No.14, pp.211-221.
6.
Raniecki B. (1977): Problems of Applied Thermoplasticity [in Polish], DSc Thesis. – IFTR Reports, Institute of Fundamental Technological Research, Polish Academy of Sciences, nr 29/1977, Warsaw, pp.1-120.
7.
Śloderbach Z. (2016): Closed set of the uniqueness conditions and bifurcations criteria in generalized coupled thermoplasticity for small deformations. – Continuum Mechanics and Thermodynamics, vol.28, pp.633-654.
8.
Śloderbach Z. (2016): Closed system of coupling effects in generalized thermo-elastoplasticity. – International Journal of Applied Mechanics and Engineering, vol.21, No.2, pp.461-483.
9.
Gyarmati J. (1970): Non-equilibrium thermodynamics. Field theory and variational principles. – Berlin, New York: Springer-Verlag.
10.
Armero F. and Simo J.C. (1993): A priori estimates and unconditionelly stable product formula alghorithms for nonlinear coupled thermoplasticity. – Int. J. Plasticity, vol.9, pp.749-782.
11.
Benall A. and Bigoni D. (2004): Effects of temperature and thermo-mechanical couplings on material instabilities and strain localization of inelastic materials. – J. Mech. Phys. Solids, vol.52, No.3, pp.725-753.
12.
Bertram A. (2003): A finite thermoplasticity based on isomorphisms. – Int. J. Plasticity, vol.19, pp.2027-2050.
13.
Candija M. and Brnic J. (2004): Associative coupled thermoplasticity at finite strain with temperature-dependent material parameters. – Int. J. Plasticity, vol.20, No.10, pp.1851-1874.
14.
Casey J. (1998): On elastic-thermo-plastic materials at finite deformations. – Int. J. Plasticity, vol.14, No.1-3, pp.173-191.
15.
Epstein M. and Maugin G.A. (2000): Thermomechanics of volumetyric growth in uniform bodies. – Int. J. Plasticity, vol.16, No.7-8, pp.951-978.
16.
Hakansson P., Wallin M. and Ristinmaa M. (2002): Comparison of isotropic hardening and kinematic hardening in thermoplasticity. – Int. J. Plasticity, vol.18, pp.379-397.
17.
Huttel C. and Matzenmiller A. (1999): Extension of generalized plasticity to finite deformations and structures. – Int. J. Plasticity, vol.36, pp.5255-5276.
18.
Itskov M. (2004): On the application of the additive decomposition of generalized strain measures in large strain plasticity. – Mechanics Res. Commun., vol.31, No.5, pp.507-517.
19.
Lehmann Th. (1991): Thermodynamical foundations of large inelastic deformations of solid bodies including damage. – Int. J. Plasticity, vol.7, pp.79-98.
20.
Mahnken R. and Stein E. (1997): Parametr identification for finite deformation elasto-plasticity in principal directions. – Computer Method Applied Mech. Engineering, vol.147, No.1-2, July 30, pp.17-39.
21.
Marakin A.A. and Sokolova M.Y. (2002): Thermomechanical models of irreversible finite deformation of anisotropic solids, strength of materials. – Vol.34, No.6, pp.529-535.
22.
Maugin G.A. and Epstein M. (1998): Geometrical material structure of elastoplasticity. – Int. J. Plasticity, vol.14, pp.109-115.
23.
Meyers A., Bruhns O.T. and Xiao H. (2000): Large strain response of kinematic hardening elastoplasticity with the logarythmic rate: Swift effect in torsion. – Meccanica, vol.35, No.3, pp.229-247.
24.
Miehe C. (1995): A theory of large strain isotropic thermoplasticity based on metric transformation tensors. – Archive of Applied Mechanics, vol.66, No.1/2, pp.45-64.
25.
Srinivasa A.R. (2001): Large deformation plasticity and the poynting effect. – Int. J. Plasticity, vol.17, No.9, pp.1189-1214.
26.
Xiao H., Bruhns O.T. and Meyers A. (2007): Thermodynamic laws and consistent Eulerian formulation of finite elastoplasticity with thermal effects. – J. Mech. Phys. Solids, vol.55, No.2, pp.338-365.
27.
Nguyen H.V. (1999): Thermomechanical Couplings in Elasto-Plastic Metals in the Case of Finie Deformations, DSc Thesis [in Polish]. – IFTR-Reports, No 10/1999, pp.1-116, Institute of Fundamental Technological Research, Polish Academy of Sciences, Warsaw.
28.
Śloderbach Z. and Pajak J. (2010): generalized coupled thermoplasticity taking into account large strains: Part I. Conditions of uniqueness of the solution of boundary-value problem and bifurcation criteria. – Mathematics and Mechanics of Solids, vol.15, No.3, pp.308-327.
29.
Śloderbach Z., Pajak J. (2010): Generalized coupled thermoplasticity taking into account large strains: Part II. A model of non-compressible elastic-plastic solid with non-associated plastic flow law. – Mathematics and Mechanics of Solids, vol.15, No.3, pp.28-341.
30.
Śloderbach Z. (2014): Thermomechanical problems of deformable bodies for small deformations. – Opole University of Technology, ISBN 978-8364056-54-3, pp.1-272.
31.
Maugin G.A. (1990): Internal variables and dissipative structure. – J. of Non-Equilibrium Thermodynamics, vol.15, pp.173-192.
32.
Simo J. and Miehe C. (1992): Associative coupled thermoplasticity at finite strains: formulation, numerical analysis and implementation. – Computer Method Applied Mech. Engineering, vol.98, pp.41-104.
33.
Raniecki B. (1979): Uniqueness criteria in solids with non-associated plastic flow laws at finite deformation. – Bulletin De l’Acadademie Polonaise des Sciences, Serie des Sciences Techniques, vol.27, pp.391-399.
34.
Raniecki B. and Bruhns O.T. (1981): Bounds to bifurcation stress in solids with non-associated plastic flow at finite strain. – J. Mech. Phys. Solids, vol.29, No.2, pp.153-172.
35.
Raniecki B. and Sawczuk A. (1975) Thermal effects in plasticity. Part I: Coupled theory. – Zeitschrift für Angewandte Mathematik und Mechanik - ZAMM, vol.55, No.6, pp.232-241.
36.
Raniecki B. and Sawczuk A. (1975): Thermal effects in plasticity. Part II: Uniqueness and applications. – Zeitschrift für Angewandte Mathematik und Mech.-ZAMM, vol.55, No.7/8, pp.363-373.
37.
Mróz Z. (1963): Non-associated flow laws in plasticity. – J. de Mecanique, vol.2, No.1, pp.21-42.
38.
Mróz Z. (1966): On forms of constutive laws for elastic-plastic solids. – Arch. Applied Mechanics, vol.18, No.1, Warszawa, pp.3-35.
39.
Hueckel T. and Maier G. (1977): Incremental boundary value problems in the presence of coupling of elestic and plastic deformations. A rock mechanics oriented theory. – International Journal of Solids and Structures, vol.13, pp.1-15.
40.
Hueckel T. and Maier G. (1977): Non-associated and coupled flow rules of elastoplasticity for geotechnical media. – Proc. 9-th International Conference of Soil Mechanics Foundation of Engineering (JCSFE), Tokyo, Speciality Session 7, Constutive relations for soils, pp.129-142.
41.
Maier G. (1970): A minimum principle for incremental elastoplasticity, with non-associated flow laws. – Journal Mechanics of Physics Solids, vol.18, pp.319-330.
| eISSN: | 2353-9003 |
| ISSN: | 1734-4492 |
Task: edition of a scientific journal, its internationalization and ensuring open access to the journal via the Internet
© 2006-2024 Journal hosting platform by Bentus
We process personal data collected when visiting the website. The function of obtaining information about users and their behavior is carried out by voluntarily entered information in forms and saving cookies in end devices. Data, including cookies, are used to provide services, improve the user experience and to analyze the traffic in accordance with the Privacy policy. Data are also collected and processed by Google Analytics tool (more).
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
You can change cookies settings in your browser. Restricted use of cookies in the browser configuration may affect some functionalities of the website.
