Static and Dynamics of a Pump Impeller with a Balancing Device Part II: Dynamic Analysis

This paper presents the theoretical study of the system comprising an impeller and a balancing device. It deals with the dynamic analysis of the system, i.e., the axial vibrations of the impeller, and the system stability. The dynamic analysis took into account linearized hydrodynamic forces and moments generated in the longitudinal clearances of the seals of the impeller. The theoretical analysis was supplemented with a numerical example with characteristics determined for a real single-stage centrifugal pump

REFERENCES (10)

Antoszewski B. and Rokicki J. (2006): Influence of heterogeneous surface on fluid flow in mechanical seals. - Chemical and Process Engineering, vol.27, No.3, pp.889 - 899.

Google Scholar

Childs D.W. (1993): Turbomachinery Rotordynamics Phenomena, Modeling, and Analysis. - John Wiley and Sons, Inc.

Google Scholar

Faria M.T.C. and Miranda W.M. (2012): Pressure dam influence on the performance of gas face seals. - Tribology International, No.47, pp.134-141.

Google Scholar

Gosiewski Z. (2008): Analysis of coupling mechanism in lateral/torsional rotor vibrations. - Journal of Theoretical and Applied Mechanics, vol.46, No.4, pp.829-844.

Google Scholar

Jędral W. (2001): Centrifugal Pumps. - Warsaw: PWN. (in Polish).

Google Scholar

Kalinicienko P.M. and Suprun A.B. (2011): Effective ways of balancing the centrifugal pump impeller. - Monograph Vibration Reliability and Hermetic Sealing Centrifugal Machines, Edited by Martsinkovsky V.A. and Zagorulko A.W., Sumy, pp.243-249. (in Russian).

Google Scholar

Korczak A. (2005): Investigations of systems counterbalancing the arial thrust in multi-stage cetrifugal pumps. - Scientific Book of the Silesian University of Technology, No.1679, Gliwice. (in Polish).

Google Scholar

Kundera C. and Martsinkovsky V.A. (2014): Static and dynamic analysis of a pump impeller with a balancing device. Part I: Static analysis. - Int. J. of Applied Mechanics and Engineering, vol.19, No.3, pp.609-619.

Google Scholar

Li W., Yang Y., Sheng D. and Chen J. (2011): A novel nonlinear model of rotor/bearing/seal system and numerical analysis. - Mechanism and Machine Theory, No.46, pp.618-631.

Google Scholar

10.

Martsinkovsky W. and Kundera C. (2008): Design theory of noncontacting seals. - Editorial of the Kielce University of Technology, Kielce. (in Polish).

Google Scholar

Submit your paper

eISSN:	2353-9003
ISSN:	1734-4492